FiberHome OLT Commands

2023 SEASON SALE Networking and Security Showcase In-stock ICT products at exclusive discounts

Compare to Huawei OLTs, FiberHome OLTs also are the popular access network equipment in the market. In this post, you can check some commands of Fiberhome OLT, such as AN5516, etc.

  1. Authorized OLT system board

(1) Login: GEPON

(2) Password: ***** //Login password GEPON

(3) User> enable //Enter enable mode, Password GEPON

(4) Password: *****

(5) AN5516# cd service // Enter the service directory

(6) AN5516\service# terminal length 0 // Set the number of lines displayed on the command line, 0 means unlimited

(7) AN5516\service# cd . // Back to the root directory

(8) AN5516# showcard // View device board status

(9) AN5516# set card_auth slot 1 type ec4b // Authorized device board

(10) AN5516# set card_auth slot 2 type ec4b // Authorized device board

(11) AN5516# set card_auth slot 3 type ec4b // Authorized device board

(12) AN5516# set card_auth slot 4 type ec4b // Authorized device board

(13) AN5516# set card_auth slot 18 type puba // Authorized device board

(14) AN5516# set card_auth slot 19 type gu6f // Authorized device board

(15) AN5516# set card_auth slot 20 type gu6f // Authorized device board

(16) AN5516# showcard

(17) AN5516# version // View system software and hardware version

(18) AN5516# hostname ST_CH2_OLT_1_AN5516 //Set hostname

(19) AN5516# set time <1970-2100> <1-12> <1-31> <HH:MM:SS> // Set device time manually

(20) AN5516# set debugip <A.B.C.D> mask <A.B.C.D> //Set debugip

(21) AN5516\service# set snmp trapreceiver add <A.B.C.D> version [v1|v2c] {community <string>}*1 // Set the trap receiving address (to choose v2c)

(22) AN5516\service#SHOW SNMP trapreceiver // View trap receiving address

(23) AN5516\service#set snmp_time_cfg interval <0-86400> serv_addr <A.B.C.D> // Set the time interval and the time server address

(24) AN5516\service#show snmp_time_cfg // View time settings

  1. Set the port working mode

(1) AN5516# cd device // Enter the device directory

(2) AN5516\device# set uplink port 19:1 auto_negotiation d     isable speed 1000m duplex full // Set the uplink port 19:1 as mandatory Gigabit full duplex

(3) AN5516\device# set uplink port 19:2 auto_negotiation disable speed 1000m duplex full

AN5516\device# set uplink port 20:1 auto_negotiation disable speed 1000m duplex full AN5516\device# set uplink port 19:3 interface_mode sgmii // Set the 19:3 port mode of the uplink port to SGMII (when using a 100M electrical port)

(4) AN5516\device# set uplink port 19:4 interface_mode sgmii AN5516\device# set uplink port 20:3 interface_mode sgmii AN5516\device# set uplink port 20:4 interface_mode sgmii AN5516\device# set control uplink port 20:4 broadcast enable limit 1500 // Set the broadcast packet suppression of the uplink port to 1500 (all ports need to be set)

(5) AN5516\device# set control uplink port 20:4 unknown enable limit 1500 // et the unknown packet suppression of the uplink port to 1500 (all ports need to be set)

(6) AN5516\device# show port <all|portlist> // View port information

(7) AN5516\device# show slot // View the connection status of the single disk and the main control disk

(8) AN5516# cd gponline AN5516\gponline# set packet_control slot 1 link 1 type broadcast status enable rate 1500 type unknown status enable rate 1500 // Set the broadcast and unknown packet suppression of No. 1 disk No. 1 pon port to 1500 (all single disks and all pon ports need to be set)

  1. Configure the OLT management address

(1) AN5516# cd service AN5516\service# set manage vlan name manage vid 235 inputport 19:2 tagged // Add system management vlan 235 uplink port is 19:2

(2) AN5516\service# set manage vlan name manage ip 132.107.235.248/24 132.107.235.254 // Configure management VLAN IP address

(3) AN5516\service# show manage vlan all // View system management VLAN information

  1. Create OLT central office VLAN

(1) AN5516# cd vlan // Enter the VLAN directory

(2) AN5516\vlan# set service pppoe vid_begin 3713 vid_end 3713 uplink 19:1 tagged service_type 1 // Configure data service central office VLAN

(3) AN5516\vlan# set service ngn vid_begin 421 vid_end 421 uplink 19:3 tagged service_type 3 // Configure the voice service central office VLAN

(4) AN5516\vlan# show service vlan // View central office VLAN

  1. Bind ONU

(1) AN5516\vlan# cd gpononu AN5516\gpononu# show discovery slot 1 link 1 // View the ONU registered under slot-1-1 PON port

(2) AN5516\gpononu# set whitelist phy_addr add 544b12345678 password null action add slot 1 link 1 onu null type 5006-20 // Add a whitelist and bind ONU to log in to the line card

(3) config\pon#show auth (pon port number) // View authorization information

(4) config\pon#sho     w status (pon port number) // View ONU online information

  1. OLT QINQ domain settings

(1) AN5516\vlan#create oltqinq_domain pppoe// Create QINQ domain template

(2) AN5516\vlan#set oltqinq_domain pppoe service_num 1 // Create a business in QINQ domain template

(3) AN5516\vlan#set oltqinq_domain pppoe 1 uprule 7 1024 4 7 4047 3 // Set the uplink rule of the QINQ domain as the first layer VLAN is greater than or equal to 1024 and less than or equal to 4047

(4) AN5516\vlan#set oltqinq_domain pppoe 1 downrule 6 3713 1 // Set the QINQ domain downlink rule to the second layer vlan equal to 3713

(5) AN5516\vlan#set oltqinq_domain pppoe 1 vlan 2 null 0 add 33024 null 3713 // Set the second layer VLAN action of the QINQ domain to add 3713

(6) AN5516\vlan#set pon attach slot 1 pon 1 attach domain pppoe // Bind the QINQ domain template PPPoE to the PON port 1 in slot 1

If you have any questions, please leave your comment.

Related topics:

Huawei FTTH & POL Solution Products Portfolio: OLT, ONU, ODN and ONT

Optical Access Network Case Design for Commercial and Residential

What is the O-RAN in the Area of Access Network?

NB-IoT vs. LoRa: Collaborators, not Competitors

Share This Post

Post Comment